Power Tool Accessories

WL Fuller 10393010 Quick Release Type C Combination Countersink and Taper Point Drill Set

WL Fuller 10393010 Quick Release Type ‘C’ Combination Countersink and Taper Point Drill Set No. 10 Set contains everything you need to pre-drill and plug forscrew sizes 5, 6, 7, 8 and 9 with the added feature of Quick Releaseability. All...

WL Fuller 10393011 Quick Release Type C Combination Countersink,Taper Point Drills,Plug Cutters Set

WL Fuller 10393011 Quick Release Type ‘C’ Combination Countersink,Taper Point Drills,Plug Cutters Set No. 11 Set contains everything you need to pre-drill and plug forscrew sizes 6, 8, 10, 12, and 14 also with the added feature ofQuick...

WL Fuller 41092007 Brad Point Drill Bit Set

WL Fuller 41092007 Brad Point Drill Bit Set A Brad Point Drill should provide the cleanest, straightest, and most accurately sized hole in wood of any reasonably priced toolon the market today. The brad in the center of the point allows accurate...

WL Fuller Drill Bit Stops 1" Diameter x 1" Long

WL Fuller Drill Bit Stops 1" Diameter x 1" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.  

WL Fuller Drill Bit Stops 1-1/2" Diameter x 1-1/2" Long

WL Fuller Drill Bit Stops 1-1/2" Diameter x 1-1/2" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops 1-1/4" Diameter x 1-1/4" Long

WL Fuller Drill Bit Stops 1-1/4" Diameter x 1-1/4" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops 1-1/8" Diameter x 1-1/8" Long

WL Fuller Drill Bit Stops 1-1/8" Diameter x 1-1/8" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops 1-3/8" Diameter x 1-3/8" Long

WL Fuller Drill Bit Stops 1-3/8" Diameter x 1-3/8" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Series 60 Carbide Uniflute Countersinks

WL Fuller Series 60 Carbide Uniflute Countersinks Series 60 Carbide Uniflute Countersink 82 degree angle. This solid carbideCountersink is recommended for abrasive materials and non-ferrousmetals. It can also be used for hardened steel. Not...

WL Fuller Series 61 High Speed Steel Uniflute Countersinks

WL Fuller Series 61 HSS Uniflute Countersinks This is the original single flute Countersink. Designed for generalpurpose countersinking, chamfering or deburring, the Uniflute can be used in ahand tool or in a machine tool. Unique cam relieved geometry...

WL Fuller Series 67 High Speed Steel Single Cutting Edge Countersink 82 degrees

WL Fuller Series 67 High Speed Steel Single Cutting Edge Countersink 82 degrees *Designed for general purpose countersinking, chamfering or deburring.*Efficient stock removal, chatter free finish.*3/16 and 1/4 tools are double ended.*Bright finish helps...

WL Fuller Series 78 Chatterless Carbide Six Flute Countersink

WL Fuller Series 78 Chatterless Carbide Six Flute Countersink The solid carbide construction (steel shanks on tools 3/8” andlarger) makes this countersink ideal for hardened steel, high temperature alloys andother tough jobs. They are not...

WL Fuller Series 79 High Speed Steel Multi-flute Countersink 82 degrees

WL Fuller Series 79 High Speed Steel Multi-flute Countersink 82 degrees Designed for maximumfeed rate countersinking and chamfering.Multiflute design reduces chip load and itinsures chatter free cutting.

WL Fuller Series 92 Aircraft High Speed Steel Three Flute Countersink

WL Fuller Series 92 Aircraft High Speed Steel Three Flute Countersink These are designed for countersinking, deburring and chamfering aircraft materials. Thebright finish helps to reduce chip build-up on the cutting edge. Spiral flute geometry for a...

WL Fuller Series CTCSK 2 Flute Carbide Tipped Quick Change Countersinks

WL Fuller Series CTCSK 2 Flute Carbide Tipped Quick Change Countersinks These 2 Flute Carbide Tipped Countersinks are designed tocut fast at high spindle speeds in woods, plastics and nonferrousmaterials. All have 82-degree angle, 1/4” QuickChange...

WL Fuller Set of 9 Type R Counterbores in Wood Holder

WL Fuller Set of 9 Type ‘R’ Counterbores in Wood Holder Designed to cut clean holes in hardwoods and plastic. Can also be used with stop collars. Counterbores for the flat under the heads of nails, spikes, and bolts. Allowing them to be sunk...

WL Fuller Stop Sets for Fuller Countersinks & Counterbores

WL Fuller Stop Sets for Fuller Countersinks & Counterbores   Designed to be used with Fuller Countersinks and Counterbores. These steel collars areheld solidly in place with two set screws, to control depth of Counterbores. The insidediameter of...

WL Fuller Tenon Cutters for Wood

WL Fuller Tenon Cutters for Wood • To make round Tenonson any shape wood partswith width not more thanoutside diameter ofcutter• All sizes with 1/2” shankto fit chuck.• Other Tenon sizes,outside diameters orshank sizes...

WL Fuller Type CR-CB Ferro-Tic Carbide Counterbores

WL Fuller Type CR Ferro-Tic Carbide Counterbores Manufactured of Ferro-Tic® machinable carbide and hardened for longwear in abrasive materials. Great for Formica, Fiberglass, Particleboard,etc.

WL Fuller Type H 4 flute Countersinks for Hardwoods & Plastics

WL Fuller Type HSW 4 flute High Speed Steel for Wood Countersinks 82 Degree   To cut wood & plastics. With angle of  82 degree.Four-blade rugged construction, these countersinks have shorterblades to reduce breakage and are designed to...