TRIMMING

Freud Top Bearing Flush Trim Bits 1/2" Shank 50-1xx

Freud Top Bearing Flush Trim Bits 1/2" Shank 50-1xx Template work and lettering Cuts all composition materials, plywoods, hardwoods, and softwoodsUse on hand-held and table-mounted routersFreud...

Freud 1-3/8" Laminate Miter Joint Bit 45-502

Freud 1-3/8" Laminate Miter Joint Bit 45-502 Producing 45° miter joints in the edge of laminated surfaces TECHNICAL SPECIFICATIONSANGLE (D) 45°BEARING DIA. (B) 1-3/8"NUMBER OF CUTTERS 2OVERALL DIA...

Freud 1/16" Radius Laminate Trim Bit 41-502

Freud 1/16" Radius Laminate Trim Bit 41-502 Routing a finished edge on plastic laminates without filing TECHNICAL SPECIFICATIONSNUMBER OF CUTTERS 2OVERALL DIA. (D) 1/2"OVERALL LENGTH (H) 2"SHANK DIA...

Freud 1/4" Solid Carbide Flush Trim Bit 64-100

Freud 1/4" Solid Carbide Flush Trim Bit 64-100 Cuts all plastic laminatesSelf-piloting designUse on hand-held routers and laminate trimmers for trimming plastic laminate TECHNICAL...

Freud Bearing Flush Trim Bits 1/2" Shank 2 & 3 Cutters

Freud Bearing Flush Trim Bits 1/2" Shank 2 & 3 Cutters Trimming laminates and routing along patterns Cuts all composition materials, plywoods, hardwoods, and softwoodsUse on hand-held or...

Freud Bearing Flush Trim Bits 1/4" Shank 2 & 3 Cutters

Freud Bearing Flush Trim Bits 1/4" Shank 2 & 3 Cutters Trimming laminates and routing along patterns Cuts all composition materials, plywoods, hardwoods, and softwoodsUse on hand-held or...

Freud Bevel Trim Bits With Bearings and Solid Carbide 41-1xx,61-1xx

Freud Bevel Trim Bits With Bearings and Solid Carbide 41-1xx,61-1xx Routing a clean, finished edge on plastic laminates Rout a clean, smooth edge of laminates with little of no time-consuming...

Freud Downshear Helix Flush Trim Bit 42-xxx

Freud Downshear Helix Flush Trim Bit 42-xxx Routing thick stock requiring a perfect top edge Down-shear action delivers easier, smoother cuts in thick materials3/4" diameter body and long cutting...

Freud Flush & Bevel Trim Bit 41-xxx,68-100

Freud Flush & Bevel Trim Bit 41-xxx,68-100 Trimming plastic laminate with straight or bevel edges These bits are true multipurpose tools, allowing you to trim laminates with your choice of a flush or...

Freud Flush Trim Downcut Spiral Bit 1/2" Shank 76-50x

Freud Flush Trim Downcut Spiral Bit 1/2" Shank 76-50x Flush trimming or pattern work with an extra clean top edgeFreud's Solid Carbide Flush Trim Spiral Bits are the best choice for your heaviest...

Freud Flush Trim Up Spiral Bit 1/2" Shank 75-50x

Freud Flush Trim Up Spiral Bit 1/2" Shank 75-50x Heavy duty trimming of abrasive or hard materialsFreud's Solid Carbide Flush Trim Spiral Bits are the best choice for your heaviest trim applications,...

Freud Flush Trim V Groove Bit 48-1xx

Freud Flush Trim V Groove Bit 48-1xx Trimming cabinet face framesThis clever bit is a real asset to the cabinetmaker of furniture builder. It routs a small, decorative “V” groove while bringing a...

Freud Insert Bevel Trim Bit 43-2xx

Freud Insert Bevel Trim Bit 43-2xx Creating a clean, beveled edge for plastic laminateYou'll always have a sharp edge available with our Insert Bevel Trim Bits. Each solid carbide insert knife has...

Freud Top & Bottom Bearing Flush Trim Bit 50-50x

Freud Top & Bottom Bearing Flush Trim Bit 50-50x Pattern work, laminate routing & general flush trim use Perfect for templates placed above or below the work piece, or to trim laminates or veneer...

Freud Top Bearing Flush Trim Bits 1/4" Shank 50-xxx

Freud Top Bearing Flush Trim Bits 1/4" Shank 50-xxx Template work and lettering Cuts all composition materials, plywoods, hardwoods, and softwoodsUse on hand-held and table-mounted routersFreud...