Dust Collection Accessories

Woodstock 4" Aluminum Blast Gate D4252

Woodstock 4" Aluminum Blast Gate D4252 This blast gate design has a hole in the barrier plate the same diameter as the opening in the cast aluminum body. This effectively fills the small gap between the two body pieces and helps prevent dust from...

Woodstock 4" Blastgate W1007

Woodstock 4" Blastgate W1007 Used in every dust collection system to control air flow from one machine to another, blast gates maximize system efficiency. We offer blast gates in both black ABS plastic and aluminum. Plastic blast gates are economically...

Woodstock 4" Connector D4262

Woodstock 4" Connector D4262 This 4" Flanged Connector makes adding a 4" OD dust port to any machine easy. Simply cut a 4" OD diameter hole and mount the connector. Flange diameter is 5-5/8". Pre-bored mounting holes. SpecificationsFlange diameter is...

Woodstock 4" Elbow W1017

Woodstock 4" Elbow W1017 Elbows are necessary whenever ductwork changes direction, such as from a dust collector to an overhead main line, or when connecting individual machines to branch lines. Specifications4" Outside DiameterABS Plastic

Woodstock 4" Hose Clamp W1022

Woodstock 4" Hose Clamp W1024 Hose clamps are used to connect flexible piping to dust hoods, blast gates and fittings. These Steel Band Hose Clamps measure 4" diameter. Specifications4" DiameterSteel Band

Woodstock 4" Hose Clamp W1024

Woodstock 4" Hose Clamp W1024 Hose clamps are used to connect flexible piping to dust hoods, blast gates and fittings. These Steel Band Hose Clamps measure 4" diameter. Specifications4" DiameterSteel Band

Woodstock 4" ID Taper x 4" Splice, Left Hand Thread D4228

Woodstock 4" ID Taper x 4" Splice, Left Hand Thread D4228 One end threads into a 4" dust collection hose and the other tapered end secures to any 4" dust port. The taper will allow for a snug fit and quick removal of the splice if it is necessary to move...

Woodstock 4" ID Taper x 4" Splice, Left Hand Thread D4255

Woodstock 4" ID Taper x 4" Splice, Left Hand Thread D4255 Add an in-line blast gate between two 4" OD spiral flexible hoses. Threaded ends twist inside flexible hose for a secure fit. SpecificationsAdd an in-line blast gate between two 4" OD spiral...

Woodstock 4" ID x 2-1/2" Quick Coupler, Right Hand Thread D4231

Woodstock 4" ID x 2-1/2" Quick Coupler, Right Hand Thread D4231 This 4" x 2-1/2" Quick Coupler make dust collection set-up easy. One end threads into the 2-1/2" ID dust collection hose and the other end is a press-fit to the 4" OD dust collection fitting.

Woodstock 4" ID x 3" Quick Coupler, Right Hand Thread D4232

Woodstock 4" ID x 3" Quick Coupler, Right Hand Thread D4232 This 4" x 3" Quick Coupler make dust collection set-up easy. One end threads into the 3" OD dust collection hose and the other end is a press-fit to the 4" ID dust collection fitting.

Woodstock 4" ID x 4" Blast Gate, Left Hand Thread D4254

Woodstock 4" ID x 4" Blast Gate, Left Hand Thread D4254 This 4" OD blast gate connects between spiral flexible hose and solid round pipe. 3-15/16" ID round end. Threaded end twists inside flexible hose for a secure fit. Specifications4" OD blast gate...

Woodstock 4" OD Straight x 4" Splice, Left Hand Thread D4263

Woodstock 4" OD Straight x 4" Splice, Left Hand Thread D4263 This 4" Left Thread to Straight Splice connects 4" spiral flexible hose to solid round pipe. Measures 3-13/16" ID x 4" OD round end. Threaded end twists inside flexible hose for a secure fit...

Woodstock 4" OD Taper x 4" Quick Coupler Left Hand Thread D4261

Woodstock 4" OD Taper x 4" Quick Coupler Left Hand Thread D4261 This 4" Quick Coupler features a 4" ID tapered male end and a 4" OD threaded end that fits 4" flexible hose. Ideal for quick connection to 4" machine dust ports. SpecificationsTapered male...

Woodstock 4" Quick Connect/Disconnect W1038

Woodstock 4" Quick Connect/Disconnect W1038 Designed to attach to the end of a 4" flexible hose and then press-on to any 4" outer diameter dust hood for a quick and easy friction fit. Ideal for use with smaller capacity, mobile dust collectors to service...

Woodstock 4" Splice W1019

Woodstock 4" Splice W1019 Splices round out our full line of special fittings for dust collection systems. Used to connect full sections of hose for longer runs or to utilize short sections. Specifications4" Outside DiametersABS Plastic

Woodstock 4" Swivel Ball Joint D4245

Woodstock 4" Swivel Ball Joint D4245 This 4" Swivel Ball Joint provides flexibility in duct layout and features a swivel design that allows up to 20° direction change. SpecificationsSwivel Joint provides flexibility in duct layout4-1/4" OD x 3-15/16"...

Woodstock 4" T-Fitting W1013

Woodstock 4" T-Fitting W1013 T-fittings provide the option of adding branches to a system to service each machine in a shop. T's are very helpful when space or design constraints prohibit the use of Y's. Available in 3" and 4" O.D. Specifications4"...

Woodstock 4" Thread Splice D4257

Woodstock 4" Thread Splice D4257 This 4" OD Splice Right Thread To Taper fitting make dust collection set-up easy. One ends threads into a 4" dust collection hose and the other end tapered end is secured to any machine with a 4" dust port. The taper will...

Woodstock 4" to 2" Reducer D4226

Woodstock 4" to 2" Reducer D4226 This Eccentric Reducer provides a step-down from a larger main line to a smaller branch line. This step-down increases air velocity near the machine where it's needed the most. Please note that this item is not designed...

Woodstock 4" to 2" Reducer D4250

Woodstock 4" to 2" Reducer D4250 These Reducers allow you to connect 4" hose to 2" hose. They feature a tapered transition for maximum efficiency. Heavy wall thickness stands up to hose-clamp pressure. Ends are 4" OD and 2" OD. SpecificationsEnds are 4"...