Door Hardware

Sugatsune ST-90, 115 HATCH PULL SATIN STAINLESS STEEL

Sugatsune ST-90, 115 HATCH PULL SATIN STAINLESS STEEL • Hold-in detent for undermount applications.Can be used vertically, on the ceiling or on the ground. Has a wide variety of potential...

Sugatsune Stainless Steel Draw Latch Polished PS

Sugatsune Polished 304 Stainless Steel Draw Catches with and without Padlock Eye

SUGATSUNE Standard Aluminum Track 118-1/8” (3000 mm)

SUGATSUNE Standard Aluminum Track 118-1/8” (3000 mm) This Track is used in conjunction with a 2 or 4 door Hardware set. The Hardware sets come specified in either 66LBS or 88LBS per door. Optional...

Sugatsune SYR140 Series STAINLESS STEEL BUTT Hinge

Sugatsune SYR140 Series STAINLESS STEEL BUTT Hinge

Sugatsune TBH LARGE HANDLE (STRAIGHT DESIGN)

Sugatsune TBH LARGE HANDLE (STRAIGHT DESIGN) • Revolutionary design aesthetic combines purityof form with solidity of feel.• Consists of a triangle-shaped bar and a bracketin the center.• Rich...

Sugatsune TLP-S PUSH KNOB LATCH

Sugatsune TLP-S PUSH KNOB LATCH• Knob is stored flush when pushed in and not in use.• Knob pops out when pressed to open the door.• Latch securely locks the door with deadbolt.• Door Thickness: 19...

Sugatsune UP-600 RECESSED PULL

Sugatsune UP-600 RECESSED PULL

Sugatsune UTA-105 SERIES RECESSED PULL (W/VENTILATOR)

Sugatsune UTA-105 SERIES RECESSED PULL (W/VENTILATOR) • Easy to grip.• Ventilating area is invisible from the front.• Excellent chemical resistance.

SUGATSUNE XL-GH01-250 INSET GLASS DOOR HINGE (PRESSURE FIT)

SUGATSUNE XL-GH01-250 INSET GLASS DOOR HINGE (PRESSURE FIT) • Pre-drilling on glass/acrylic not required.• Door thickness: 4~6 mm• Door size: Max. W400 × H600 mm(W15-3/4" × H23-5/8")• Door Weight:...

SUGATSUNE XL-GH03-48-8 HALF OVERLAY GLASS DOOR HINGE

SUGATSUNE XL-GH03-48-8 HALF OVERLAY GLASS DOOR HINGE • Medium size hinge for glass/acrylic doors.• Door thickness: 5~8 mm• Door size: Max. W650 × H900 × t8 mm(W25-19/32" × H35-7/16" × t5/16")• Door...

Sugatsune YFN ENCLOSURE DOOR STOPS

Sugatsune YFN ENCLOSURE DOOR STOPS • Door stops for enclosures that mechanically lockdoors open.• Release the stay by lifting with foot.• For horizontally swinging doors only.• Non-Handed: Install on...

Sugatsune YFNS-300W STAINLESS STEEL FOOT STAY (TWO-ANGLE LOCK)

Sugatsune YFNS-300W STAINLESS STEEL FOOT STAY (TWO-ANGLE LOCK) • For horizontally swinging doors.• Mechanically locks door at 85Ëš and 110Ëš (fully opened).• Simply lift the stay with foot toe to...

Sugatsune ZL-1701-10 Zwei L Lift-Off Hinge

Sugatsune ZL-1701-10 Zwei L Lift-Off Hinge Made of highly corrosion resistant SUS316Ultrapremium Zwei L finish. Zwei L finish: Using top class polishing technology, these products combine the...

SUGATSUNR HG-JG150 GRAVITY SOFT-CLOSE HINGE HANDED

SUGATSUNR HG-JG150 GRAVITY SOFT-CLOSE HINGE HANDED • Lift-off hinges for easy installation and removal of a door. Automatically and quietly closes the doors without additional dampers or door closers...

Deltana DSPUT ORNATE TIP Finials Solid Brass

Deltana DSPUT ORNATE TIP Finials Solid Brass Deltana Solid Brass finials are available in an array of fine finishes and fit Deltana solid brass hinges that range from 3-1/2" to 5 inches in size. U/M:...