Hardware

Sugatsune SAD-160 Door Opener (Holds Door Open at 90 Degrees)

Sugatsune SAD-160 Door Opener (Holds Door Open at 90 Degrees) • Holds door open at 90°. • Door can be removed when used in conjunction with a lift-off hinge. • Right-handed use only.

Sugatsune SAM S/S WIRE FACE VENTILATOR

SUGATSUNE VENT • 0.4 mm mesh wire diameter.SAM SERIES• Affix with glue.• Low profile design is ideal for tight spaces.

Sugatsune SAS-V450 OVERHEAD CONCEALED DOOR STOP MODELS

Sugatsune SAS-V450 OVERHEAD CONCEALED DOOR STOP MODELS • Adjustable opening angle between 0°-110°.• Non-handed.• Stop Only Type prevents door from overextending at yourpreferred angle.• Works with 1-3/8", 1-3/4", and 2" thick...

Sugatsune SAS-V450H OVERHEAD CONCEALED DOOR STOP & HOLDERS HOLD OPEN MODELS

Sugatsune SAS-V450H OVERHEAD CONCEALED DOOR STOP & HOLDERS HOLD OPEN MODELS Adjustable opening angle between 0°-110°.• Non-handed. • Hold Open Type holds door open at preferred angle andprovides stop function.• Works with...

Sugatsune SAS-V600 OVERHEAD CONCEALED DOOR STOP MODELS

Sugatsune SAS-V600 OVERHEAD CONCEALED DOOR STOP MODELS • Adjustable opening angle between 0°-110°.• Non-handed.• Stop Only Type prevents door from overextending at yourpreferred angle.• Works with 1-3/8", 1-3/4", and 2" thick...

Sugatsune SAS-V600H OVERHEAD CONCEALED DOOR STOP & HOLDERS HOLD OPEN MODELS

Sugatsune SAS-V600H OVERHEAD CONCEALED DOOR STOP & HOLDERS HOLD OPEN MODELS Adjustable opening angle between 0°-110°.• Non-handed. • Hold Open Type holds door open at preferred angle andprovides stop function.• Works with...

Sugatsune SAZ DIE CAST HANDLE

Sugatsune SAZ-121CR DIE CAST HANDLE

Sugatsune SBH LARGE HANDLE (OFF-SET DESIGN)

Sugatsune SBH LARGE HANDLE (OFF-SET DESIGN) • A minimalist yet functional profile.• Square handle fits perfectly in the hand.• The unique design creates the impression of afloating handle.

Sugatsune SBL-35 Slide Bolt

Sugatsune SBL-35 Slide Bolt • Supplied with mortise and surface strike.

Sugatsune SCC-TF30 COMPACT DRAW LATCH

Sugatsune SCC-TF30 COMPACT DRAW LATCH • Compact size.• Adjustable arm latch.• Screw not included. Recommended screw sizeM3.• Provides consistent hold tension for securelatching. Adjustment shaft can be twisted to adjust length post...

Sugatsune SCCA-40 40mm Compression Draw Latch

Sugatsune SCCA-40 40mm Compression Draw Latch • Spring loaded design compensates for tolerance andvibrations.• Provides constant hold tension for secure latching.  

Sugatsune SCR3-15 STAINLESS STEEL MINI SLIDE FULL EXTENSION NOTE--STEEL BEARINGS SOLD EACH!

Sugatsune SCR3-15 STAINLESS STEEL MINI SLIDE FULL EXTENSION NOTE--STEEL BEARINGS SOLD EACH! SCR3 PDF

Sugatsune SCR3-15S FULLY STAINLESS STEEL MINI SLIDE FULL EXTENSION SOLD EACH!

Sugatsune SCR3-15S FULLY STAINLESS STEEL MINI SLIDE FULL EXTENSION SOLD EACH! SCR3-15S PDF

Sugatsune SCRL2-15 STAINLESS STEEL MINI SLIDE SHORT EXTENSION STEEL BEARINGS SOLD EACH!

Sugatsune SCRL2-15 STAINLESS STEEL MINI SLIDE SHORT EXTENSION STEEL BEARINGS SOLD EACH!  

Sugatsune SCRL2-15S FULLY STAINLESS STEEL MINI SLIDE SHORT EXTENSION SOLD EACH!

Sugatsune SCRL2-15S FULLY STAINLESS STEEL MINI SLIDE SHORT EXTENSION SOLD EACH!  

Sugatsune SCRW2-15 STAINLESS STEEL MINI SLIDE 2-WAY STEEL BEARINGS SOLD EACH!

Sugatsune SCRW2-15 STAINLESS STEEL MINI SLIDE 2-WAY STEEL BEARINGS SOLD EACH! ●3/4 extension (2 members).●Only 15.5mm in height with small deflection, suitable for variousplaces.[Remarks]●Types with slide length 80mm have no holes marked with ※.●Install...

Sugatsune SCRW2-15S FULLY STAINLESS STEEL MINI SLIDE 2-WAY SOLD EACH!

Sugatsune SCRW2-15S FULLY STAINLESS STEEL MINI SLIDE 2-WAY SOLD EACH! ●3/4 extension (2 members).●Only 15.5mm in height with small deflection, suitable for various places.●Grease (NSF H1 Registered Food Grade Lubricants) for foodmachinery is used...

Sugatsune SD-160 RECESSED PULL

Sugatsune SD-160 RECESSED PULL

Sugatsune SDH-G DROP HINGE (FOR GLASS DOOR) OPTIONAL FACE PLATES

Sugatsune SDH-G DROP HINGE (FOR GLASS DOOR) OPTIONAL FACE PLATES • 90˚ opening angle creates 180˚ surface. • 3-way adjustment: Door gap : 5/64" ~ 1/8" (2 mm - 3 mm) Horizontal : ± 3/64" (1 mm) Overlay : 35/64" ~ 5/8" (14 mm - 16...

Sugatsune SDS-100 SOFT-DOWN STAY without a catch

Sugatsune SDS-100 SOFT-DOWN STAY without a catch • For downward-opening flap doors.• Built-in damper causes flap to open gently near fully open radius.• Non-handed. SDS-100 does not have a catch and needs to have one installedseparately...