Hardware

Sugatsune S-350 SERIES TIE RACKS

Sugatsune S-350 SERIES TIE RACKS Flat Bar Design

Sugatsune S-6166-2 LIFT-OFF HINGE (WELD-ON)

Sugatsune S-6166-2 LIFT-OFF HINGE (WELD-ON) • Weld-on type stainless steel lift-off hinge.• Left and Right handed available.• Door weight: Max. 40 kg/pair (88 lbs/pair)

Sugatsune S-6166-6 LIFT-OFF HINGE (WELD-ON)

Sugatsune S-6166-6 LIFT-OFF HINGE (WELD-ON) • Weld-on type stainless steel lift-off hinge.• Left and Right handed available.• Door weight: Max. 90 kg/pair (198 lbs/pair)

Sugatsune S-6173-2 LIFT-OFF HINGE

Sugatsune S-6173-2 LIFT-OFF HINGE • Screw hole is countersunk from both sides.• Non-handed.• Door weight: Max. 40 kg/pair (88 lbs/pair)

Sugatsune S-6173-5 LIFT-OFF HINGE

Sugatsune S-6173-5 LIFT-OFF HINGE • Screw hole is countersunk from both sides.• Non-handed.• Door weight: Max. 50 kg/pair (110 lbs/pair)

Sugatsune S-AT01, S-AT02 SPRING LOADED LID STAY

Sugatsune S-AT01, S-AT02 SPRING LOADED LID STAY • Side wall mounted.• Spring mechanism assists in lifting door and holds in open position(10°~80°).• Can be installed individually or in pairs.• Non-Handed: Can be installed on...

Sugatsune S-ATJS BALANCE ADJUSTABLE SPRING LOADED LID STAY

Sugatsune S-ATJS BALANCE ADJUSTABLE SPRING LOADED LID STAY • Back panel mounted.• Spring mechanism assists in lifting door and holds in open position (10°~80°).• The balance adjustment allows for use in wider range of lids.•...

Sugatsune S-YT SPRING LOADED LID STAY

Sugatsune S-YT SPRING LOADED LID STAY • Spring mechanism assists in lifting door andholds in open position.• Handed: Specific left and right hand mounting.

Sugatsune S165-76 OVAL ABS CABLE GROMMET

Sugatsune S165-76 OVAL ABS CABLE GROMMET

Sugatsune SAD STAINLESS STEEL VENTILATOR Mesh Type

Sugatsune SAD STAINLESS STEEL VENTILATOR Mesh Type • 0.4 mm mesh wire diameter.• Affix with glue or tack.

Sugatsune SAM S/S WIRE FACE VENTILATOR

SUGATSUNE VENT • 0.4 mm mesh wire diameter.SAM SERIES• Affix with glue.• Low profile design is ideal for tight spaces.

Sugatsune SAZ DIE CAST HANDLE

Sugatsune SAZ-121CR DIE CAST HANDLE

Sugatsune SBH LARGE HANDLE (OFF-SET DESIGN)

Sugatsune SBH LARGE HANDLE (OFF-SET DESIGN) • A minimalist yet functional profile.• Square handle fits perfectly in the hand.• The unique design creates the impression of afloating handle.

Sugatsune SBL-35 Slide Bolt

Sugatsune SBL-35 Slide Bolt • Supplied with mortise and surface strike.

Sugatsune SCC-TF30 COMPACT DRAW LATCH

Sugatsune SCC-TF30 COMPACT DRAW LATCH • Compact size.• Adjustable arm latch.• Screw not included. Recommended screw sizeM3.• Provides consistent hold tension for securelatching. Adjustment shaft can be twisted to adjust length post...

Sugatsune SD-160 RECESSED PULL

Sugatsune SD-160 RECESSED PULL

Sugatsune SDS-50G-CR FACE PLATE for DC-90 and DC-100 Damper Catch

Sugatsune SDS-50G-CR FACE PLATE for DC-90 and DC-100 Damper Catch Black or Chrome

Sugatsune SDS-C100 SOFT-DOWN STAY

Sugatsune SDS-C100 SOFT-DOWN STAY • For DOWNWARD-OPENING FLAP DOOR used withpiano, butt or drop hinges (SDH-001, SDH-P, P.238).• SDS-C100 (with catch) is designed to hold door inclosed position.• SDS-100 does not have a catch feature...

Sugatsune SDS-C301 FLAP STAY

Sugatsune SDS-C301N SOFT-DOWN STAY • For UPWARD-OPENING FLAP DOOR used withconcealed, piano or butt hinges.• SDS-C301N is designed to hold door in closedand opened position.• Non-handed.• Torque Calculation:Torque = Door Height...

SUGATSUNE SELF CLOSING GLASS SLIDING DOOR SYSTEM ( Door Weight 66 ~ 176 lbs ) LM-80G

SELF CLOSING GLASS SLIDING DOOR SYSTEM ( Door Weight 66 ~ 176 lbs ) LM-80G • Self closing sliding door system – no electricity required• Equipped with damper for smooth and soft closing, eliminatingslamming.• No-pre-drilled holes on...