WL Fuller

WL Fuller Set of 6 Type B Counterbores in Wood Holder

WL Fuller Set of 6 Type ‘B’ Counterbores in Wood Holder 10290006  Designed to cut clean holes in wood and plastic. Can also be used with stop collars. Counterbores for the flat under...

WL Fuller Stop Sets for Fuller Countersinks & Counterbores

WL Fuller Stop Sets for Fuller Countersinks & Counterbores   Designed to be used with Fuller Countersinks and Counterbores. These steel collars areheld solidly in place with two set screws,...

WL Fuller Drill Bit Stop Sets

WL Fuller Drill Bit Stop Sets These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.    

WL Fuller Drill Bit Stops 1-1/2" Diameter x 1-1/2" Long

WL Fuller Drill Bit Stops 1-1/2" Diameter x 1-1/2" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops 1-3/8" Diameter x 1-3/8" Long

WL Fuller Drill Bit Stops 1-3/8" Diameter x 1-3/8" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops 1-1/4" Diameter x 1-1/4" Long

WL Fuller Drill Bit Stops 1-1/4" Diameter x 1-1/4" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops 1-1/8" Diameter x 1-1/8" Long

WL Fuller Drill Bit Stops 1-1/8" Diameter x 1-1/8" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops 1" Diameter x 1" Long

WL Fuller Drill Bit Stops 1" Diameter x 1" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.  

WL Fuller Drill Bit Stops7/8" Diameter x 7/8" Long

WL Fuller Drill Bit Stops7/8" Diameter x 7/8" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops 3/4" Diameter x 3/4" Long

WL Fuller Drill Bit Stops 3/4" Diameter x 3/4" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops 5/8" Diameter x 5/8" Long

WL Fuller Drill Bit Stops 5/8" Diameter x 5/8" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.  

WL Fuller Drill Bit Stops 1/2" Diameter x 1/2" Long

WL Fuller Drill Bit Stops 1/2" Diameter x 1/2" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops 7/16" Diameter x 1/2" Long

WL Fuller Drill Bit Stops 7/16" Diameter x 1/2" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops 3/8" Diameter x 1/2" Long

WL Fuller Drill Bit Stops 3/8" Diameter x 1/2" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Type X Counterbores for Hardwoods & Plastics

WL Fuller Type X Counterbores for Hardwoods & Plastics Type ‘X’ CounterboresDesigned to cut faster and deeper inhardwoods.Adaptable to high or low speedspindles and hardened for...

WL Fuller Type B Counterbores for Softwoods & Plastics

WL Fuller Type B Counterbores for Softwoods & Plastics Type 'B' CounterboresDesigned to cut clean holes in softwood.Can also be used with stop collars to control depth of cut.Counterbores...

WL Fuller Type R Stainless Steel Counterbores for Hardwoods & Plastics

WL Fuller Type R Stainless Steel Counterbores for Hardwoods & Plastics With extension lip pattern cutting edges, thisCounterbore cuts a clean hole withouttearing woods or plastics.Made of...

WL Fuller Type KS Stainless Steel Countersinks for Hardwoods

WL Fuller Type KS Stainless Steel Countersinks for Hardwoods Type K Countersinks are 3” overall length and designed for deep countersinking or counterboring. Theycan also be used with drill jig...

WL Fuller Type CR-CB Ferro-Tic Carbide Counterbores

WL Fuller Type CR Ferro-Tic Carbide Counterbores Manufactured of Ferro-Tic® machinable carbide and hardened for longwear in abrasive materials. Great for Formica, Fiberglass, Particleboard,etc.

WL Fuller Type CC 4 flute Carbide Countersinks

WL Fuller Type CC 4 flute Carbide Countersinks Carbide Countersinks: Manufactured of Ferro-Tic machinable carbide and hardened for longwear in abrasive materials. Great for Formica, Fiberglass,...