WL Fuller

WL Fuller Drill Bit Stops 1-1/2" Diameter x 1-1/2" Long

WL Fuller Drill Bit Stops 1-1/2" Diameter x 1-1/2" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops 1-3/8" Diameter x 1-3/8" Long

WL Fuller Drill Bit Stops 1-3/8" Diameter x 1-3/8" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops 1-1/4" Diameter x 1-1/4" Long

WL Fuller Drill Bit Stops 1-1/4" Diameter x 1-1/4" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops 1-1/8" Diameter x 1-1/8" Long

WL Fuller Drill Bit Stops 1-1/8" Diameter x 1-1/8" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops 1" Diameter x 1" Long

WL Fuller Drill Bit Stops 1" Diameter x 1" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.  

WL Fuller Drill Bit Stops7/8" Diameter x 7/8" Long

WL Fuller Drill Bit Stops7/8" Diameter x 7/8" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops 3/4" Diameter x 3/4" Long

WL Fuller Drill Bit Stops 3/4" Diameter x 3/4" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops 5/8" Diameter x 5/8" Long

WL Fuller Drill Bit Stops 5/8" Diameter x 5/8" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.  

WL Fuller Drill Bit Stops 1/2" Diameter x 1/2" Long

WL Fuller Drill Bit Stops 1/2" Diameter x 1/2" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops 7/16" Diameter x 1/2" Long

WL Fuller Drill Bit Stops 7/16" Diameter x 1/2" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops 3/8" Diameter x 1/2" Long

WL Fuller Drill Bit Stops 3/8" Diameter x 1/2" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Type X Counterbores for Hardwoods & Plastics

WL Fuller Type X Counterbores for Hardwoods & Plastics Type ‘X’ CounterboresDesigned to cut faster and deeper inhardwoods.Adaptable to high or low speedspindles and hardened for...

WL Fuller Type B Counterbores for Softwoods & Plastics

WL Fuller Type B Counterbores for Softwoods & Plastics Type 'B' CounterboresDesigned to cut clean holes in softwood.Can also be used with stop collars to control depth of cut.Counterbores...

WL Fuller Type R Stainless Steel Counterbores for Hardwoods & Plastics

WL Fuller Type R Stainless Steel Counterbores for Hardwoods & Plastics With extension lip pattern cutting edges, thisCounterbore cuts a clean hole withouttearing woods or plastics.Made of...

WL Fuller Type KS Stainless Steel Countersinks for Hardwoods

WL Fuller Type KS Stainless Steel Countersinks for Hardwoods Type K Countersinks are 3” overall length and designed for deep countersinking or counterboring. Theycan also be used with drill jig...

WL Fuller Type CR-CB Ferro-Tic Carbide Counterbores

WL Fuller Type CR Ferro-Tic Carbide Counterbores Manufactured of Ferro-Tic® machinable carbide and hardened for longwear in abrasive materials. Great for Formica, Fiberglass, Particleboard,etc.

WL Fuller Type CC 4 flute Carbide Countersinks

WL Fuller Type CC 4 flute Carbide Countersinks Carbide Countersinks: Manufactured of Ferro-Tic machinable carbide and hardened for longwear in abrasive materials. Great for Formica, Fiberglass,...

WL Fuller Type H 4 flute Countersinks for Hardwoods & Plastics

WL Fuller Type HSW 4 flute High Speed Steel for Wood Countersinks 82 Degree   To cut wood & plastics. With angle of  82 degree.Four-blade rugged construction, these countersinks...

WL Fuller Type JH 4 flute Countersinks

WL Fuller Type JH 4 flute Countersinks Type JH are 2” OAL with a 1/4” hex shank.

WL Fuller Type J 4 flute Countersinks

WL Fuller Type J 4 flute Countersinks Type J four flute Countersink with 1/4” shank to fitchuck and help reduce breakage of small diameter drills.All sizes are 1-1/2” overall length and...