Stops

WL Fuller Stop Collars for Countersinks and Counterbores. 1/4" thru 1-1/2"

WL Fuller Stop Collars for Countersinks and Counterbores. 1/4" thru 1-1/2" Stop Collars for Countersinks and Counterbores: Designed to be used with Fuller Countersinks and Counterbores. These steel collars are held solidly in place with two set screws,...

WL Fuller Drill Bit Stops 3/8" Diameter x 1/2" Long

WL Fuller Drill Bit Stops 3/8" Diameter x 1/2" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops7/8" Diameter x 7/8" Long

WL Fuller Drill Bit Stops7/8" Diameter x 7/8" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stop Sets

WL Fuller Drill Bit Stop Sets These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.    

WL Fuller Drill Bit Stops 1/2" Diameter x 1/2" Long

WL Fuller Drill Bit Stops 1/2" Diameter x 1/2" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops 5/8" Diameter x 5/8" Long

WL Fuller Drill Bit Stops 5/8" Diameter x 5/8" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.  

WL Fuller Drill Bit Stops 7/16" Diameter x 1/2" Long

WL Fuller Drill Bit Stops 7/16" Diameter x 1/2" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops 3/4" Diameter x 3/4" Long

WL Fuller Drill Bit Stops 3/4" Diameter x 3/4" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

General Drill Stops, Six Assorted S838

General Drill Stops, Six Assorted S838 The #S838 Drill Stops, Six Assorted prevent excessive penetration of twist and brad point drill bits. Positive depth control assures identical hole depths on successive jobsMade of cold rolled steel, with a black...

Big Horn 6 Piece 3/16-Inch to 1/2-Inch Drill Stop Set 19126

Big Horn 6 Piece 3/16-Inch to 1/2-Inch Drill Stop Set 19126 Big Horn 19126 6 Piece, Drill Stop Set, For Use On Twist Or Brad Point Drills To Prevent Excessive Drill Penetration, Positive Depth Control Assures Exact Hole Depths For Multiple Drilling Jobs,...

Big Horn 7 Piece Split Ring Stop Collar Set 19123

Big Horn 7 Piece Split Ring Stop Collar Set 19123 Big Horn 19123 7pc Split Ring - Stop Collar Set. Designed to grip the entire diameter of your drill bit. Used to accurately control the depth of the hole you are drilling. These split collars will hold...

WL Fuller Drill Bit Stops 1" Diameter x 1" Long

WL Fuller Drill Bit Stops 1" Diameter x 1" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.  

WL Fuller Drill Bit Stops 1-1/2" Diameter x 1-1/2" Long

WL Fuller Drill Bit Stops 1-1/2" Diameter x 1-1/2" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops 1-1/4" Diameter x 1-1/4" Long

WL Fuller Drill Bit Stops 1-1/4" Diameter x 1-1/4" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops 1-1/8" Diameter x 1-1/8" Long

WL Fuller Drill Bit Stops 1-1/8" Diameter x 1-1/8" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Drill Bit Stops 1-3/8" Diameter x 1-3/8" Long

WL Fuller Drill Bit Stops 1-3/8" Diameter x 1-3/8" Long These steel Drill Stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

WL Fuller Stop Sets for Fuller Countersinks & Counterbores

WL Fuller Stop Sets for Fuller Countersinks & Counterbores   Designed to be used with Fuller Countersinks and Counterbores. These steel collars areheld solidly in place with two set screws, to control depth of Counterbores. The insidediameter of...