SOLID SURFACE

Freud 1-1/2" Solid Surface Edge Profile

Freud 1-1/2" Solid Surface Edge Profile Decorative edges on all solid surface tops TECHNICAL SPECIFICATIONSBEARING TYPE SteelNUMBER OF CUTTERS 2OVERALL DIA. (D) 1-1/2"SHANK DIA. (A) 1/2"CARBIDE HEIGHT (H) 2"MAX RPM 16000 PRODUCT OVERVIEW: Freud's big...

Freud 1/8" Radius Drainboard Bit

Freud 1/8" Radius Drainboard Bit Routing Grooves in Drainboard Countertops TECHNICAL SPECIFICATIONSNUMBER OF CUTTERS 2OVERALL DIA. (D) 1/2"OVERALL LENGTH (H) 2-7/8"SHANK DIA. (A) 1/2"CARBIDE HEIGHT (H) 1/2"RADIUS (R) 1/8"MAX RPM 24000 PRODUCT OVERVIEW:...

Freud 2" Solid Surface Edge Profile

Freud 1‑1/2" Solid Surface Edge Profile Decorative edges on all solid surface tops TECHNICAL SPECIFICATIONSBEARING TYPE SteelNUMBER OF CUTTERS 2OVERALL DIA. (D) 2"SHANK DIA. (A) 1/2"CARBIDE HEIGHT (H) 1-1/8"MAX RPM 16000 PRODUCT OVERVIEW: Freud's big...

Freud 3/4" Flush Trim Solid Surface Bit

Freud 3/4" Flush Trim Solid Surface Bit Flush trimming of solid surface materials TECHNICAL SPECIFICATIONSNUMBER OF CUTTERS 2OVERALL DIA. (D) 3/4"OVERALL LENGTH (H) 3-5/8"SHANK DIA. (A) 1/2"CARBIDE HEIGHT (H) 1-3/4"MAX RPM 24000 PRODUCT OVERVIEW: With a...

Freud 5/8" Wavy Joint Bit

Freud 5/8" Wavy Joint Bit Producing a strong joint in solid surface countertops TECHNICAL SPECIFICATIONS: MINOR HEIGHT (M) 1/8"NUMBER OF CUTTERS 2OVERALL DIA. (D) 5/8"OVERALL LENGTH (H) 3-1/8"SHANK DIA. (A) 1/2"SMALL DIA. (N) 37/64"CARBIDE HEIGHT (H)...

Freud Inlay Bits For Solid Surface

Freud Inlay Bits For Solid Surface Inlay bits allow you to add a beautiful accent to the edges of solid surface tops by inlaying wood, metal or contrasting solid surface strips. Specially formulated carbide is ideal for fabricating solid surface...

Freud No Drip Edge Bit

Freud No Drip Edge Bit The No Drip Edge Bit creates a slightly raised edge along countertops to prevent drips from spilling over. Specially formulated carbide is ideal for fabricating solid surface materials. Use in hand-held routers to rout all solid...

Freud Ogee Bowl Bits

Freud Ogee Bowl Bits Freud Ogee Bowl Bits are precisely designed to trim the joint between solid surface countertops and solid surface sink bowls with an ogee edge, rounding off the top surface and dipping slightly into the face of the bowl with a convex...

Freud Overhang Trim & Cut Out Bits

Freud Overhang Trim & Cut Out Bits Before putting the finished edge on sink cut outs, it is important to use these Overhang Trim bits to remove most of the material and leave only a small amount of top for your Round Over, Ogee, Bevel or Bull Nose...

Freud Radius Under Rounding Bit For Bull Nose

Freud Radius Under Rounding Bit For Bull Nose Routing the lower portion of a bull nose edge 85-374: 1/2" Radius Under Rounding Bit For Bull Nose TECHNICAL SPECIFICATIONSBEARING DIA. (B) 2-1/8"NUMBER OF CUTTERS 2OVERALL LENGTH (H) 3"SHANK DIA. (A)...

Freud Repair,Trimming & Bowl Removal

Freud Repair,Trimming & Bowl Removal Freud's selection of Trim and Repair Bits allows professional fabricators to make any required solid surface repair. This range includes a Trim & Groove bit to rout spline grooves, a Dovetail Set to rout...

Freud Round Over Bowl Bits

Freud Round Over Bowl Bits Freud Round Over Bowl Bits are precisely designed to trim the joint between solid surface countertops and solid surface sink bowls, and create a smooth, rounded edge. Choose the radius, cutting length and cutting angle that...

Freud Rounding Over Bits

Freud Rounding Over Bits PRODUCT OVERVIEW: Rounding Over Bits are designed to rout smooth, rounded top edges along countertops, or use them in combination with Under Rounding Bits to create bull nose profiles. Use these bits in hand-held routers to rout...

Freud Solid Surface Bevel Bowl Bits

Freud Solid Surface Bevel Bowl Bits Freud Bevel Bowl Bits are precisely designed to trim the joint between solid surface countertops and solid surface sink bowls with a beveled edge. Choose the cutting angle that matches the bowl you are using. Bits...