Product Description
PENTEK SPP-235P-75 5 & 7-1/2HP 230V Single-Phase Protector
Applications
Water systems…for residential, multiple housing, farm
and commercial installations, where a 4" 2 or 3-wire
submersible motor or above-ground motor is used.
Features
The SPP-111P-3RL, SPP-233P & SPP-235P single-phase
protectors include a unique microcontroller-based voltage
and current-sensing circuit that constantly monitors
the incoming power for fluctuations including overcurrent
and undercurrent. When an abnormality, such as loss
of suction, is detected, the control deactivates its output
relay and directly disconnects the pump motor. The SPP
then begins its user-selectable restart delay (dry-well
recovery) timer. When the timer counts to zero or power
is removed and reapplied, the SPP reactivates its output
relay and turns the pump back on. An infrared LED communicates
directly with a handheld diagnostic tool called
the Informer (sold separately). The Informer displays 16
parameters including calibration point, trip point, running
points, and last fault. The SPPs are all mounted in a
NEMA 3R enclosure.
Protects Pumps From
Dry Well Overvoltage
Flow Restriction (Dead Head) Undervoltage
Overcurrent (Jammed
