Product Description
MICROJIG GRR-RIPPER Double Pack Pro (2-Pack) GR-420
NO SALES TAX EVER
Virtually eliminates kickback on table saws.
Kickback occurs when the workpiece strays from the fence, and gets pinched between the saw blade and the fence. The rear teeth of the blade grab the workpiece, turning it into a dangerous projectile. The only way to avoid kickback is to maintain control of your workpiece through the entire cut.
The GRR-RIPPER® provides downward and inward pressure, keeping both sides of the cut parallel to the blade. This prevents the workpiece from straying from the rip fence, virtually eliminating kickback.
Rip without stopping or burning.
While ripping long stock, stopping to reposition your grip can compromise cut quality. The saw's vibration will leave unsightly blade marks and burning with every pause. Using two GRR-RIPPERs allows you to feed long stock continuously without stopping, virtually eliminating burning and blade marks caused by inconsistent feed rate. Parts come off the saw ready to use with little to no additional sanding or planing.
Complete precision, control, and safety.
Using two GRR-RIPPERs allows you to feed long stock continuously without stopping, virtually eliminating burning and blade marks caused by inconsistent feed rate. Parts come off the saw ready to use with no additional sanding or planing.
The 1/8” Leg allows you to rip thin strips down to ⅛”, safely and repeatably. Excellent for edge banding, models, or decorative inlays.
The Gravity Heel Kit comes with 5 dynamic sacrificial heels and mounting hardware. They automatically retract mid-board, and drop down to hook the tail end of the workpiece. The specially formulated plastic material allows them to be cut, providing support to prevent tearout.
The included Stabilizing Plate provides 250% more stabilizing surface with two additional points of contact. It keeps the workpiece locked tight to the fence and parallel to the blade.
The included Adjustable Spacer gives you 54% more gripping surface for controlling larger workpieces. Adjustment slots provide clearance for exposed router bits while maintaining a flat edge on the fence
The Handle Bridges distribute downward pressure evenly for greater control and safer cuts. You’ll notice the difference.
The Deflector / Connector acts as a barrier between your hands and spinning blades while deflecting chips and debris. It also connects to GRR-RIPPERs equipped with Handle Bridges. Two GRR-RIPPERs means twice the control while working with larger workpieces.
