Product Description
Freud 1-3/8" Raised Panel “V” Joint Bit 99-038
Producing strong, attractive glue joint raised panels
TECHNICAL SPECIFICATIONS
ANGLE (D) 80°
MINOR HEIGHT (M) 3/16"
NUMBER OF CUTTERS 2
OVERALL DIA. (D) 1-3/8"
OVERALL LENGTH (H) 3-1/16"
SHANK DIA. (A) 1/2"
CARBIDE HEIGHT (H) 1-37/64"
MAX RPM 16000
PRODUCT OVERVIEW:
These bits are specially designed to make glue joints for raised panels. Thanks to the interlocking "V" Joints, the mating surfaces are at an angle to the finished surface of the panel, not vertical, so the dark lines like those created by standard finger joint bits are not visible. Use to rout hardwood, softwood or composites in table-mounted routers. Bit does not have to be precisely centered in the work piece. Simply adjust the bit height 3/32" after routing the first piece, and then rout the mating piece.
The perfect joint for glued-up raised panels
Bit does not have to be centered in the wood. Simply raise or lower the bit 3/32" to route the mating edge
Cuts all hardwood, softwood and composites
Use on table-mounted routers
Freud Perma-SHIELD® Coating
Ideal For: Joining pieces of solid wood to produce strong door panels
