Product Description
Accuride AL115RC Linear Track System
Aluminum track available in two lengths: 47" and 94," with and without pre-drilled holes
Track may be cut down to desired length or butted together to extend length
Recirculating ball carriages in two options: stainless steel ball bearing carriage or polymer ball bearing carriage
Multiple carriages may be inserted into tracks. Carriages may be used separately to provide independent movement, combined as a unit, or both methods within one track
Track may be side, flat, or vertically mounted
Flat mounted track may be oriented with ball carriage facing up or down
Load capacity is based on the type and number of ball carriages. See technical sheet for additional information.
Corrosion-resistant
Tracks have drilling marks for both the fixing holes and end stops
For light- and medium-duty applications
•Aluminum track available in two lengths: 47" and 94"
• Corrosion-resistant track may be cut to the desired length. Available with or without pre-drilled holes.
• Multiple lengths of track can be butted together to extend the track to any distance required.
•Load Capacity up to 265 lbs. [120kg]
•Easy Installation Tracks have drilling marks for fixing holes and end stops.
• End stops are attached after the carriages are inserted to contain carriages.
• Tracks with and without fixing holes.
115RC Optional Accessories:
DZ0115-DJIGRC: Drilling Jig (made to order)
CB0115-ECRC: Easy-Close Kit
4180-0757-XE: Nuts and Washers for Individual Carriages
∙ 2 ea. M5 x 16mm Barrel nuts
∙ 2 ea. Star washers
4180-0756-XE: 115RC Hardware Kit w/Polymer Ball Carriages
∙ 2 ea. CB0115-CASSRC
∙ 2 ea. AL0115-STOPRC
∙ 4 ea. M5 x 16mm Barrel nuts
∙ 4 ea. Star washers
4180-0746-XE: 115RC Hardware Kit w/ Stainless Steel Ball Carriages
∙ 2 ea. SS0115-CASSRC
∙ 2 ea. AL0115-STOPRC
∙ 4 ea. M5 x 16mm Barrel nuts
∙ 4 ea. Star washers
