Hand Tools

Blum T65.1600.01 Concealed Runner Template

Blum Concealed Runner Template, the essential tool for drawers using any series MOVENTO or TANDEM runners. Use the Concealed Runner Template to bore the 6mm holes for the rear hooks and to pre-bore the 2.5mm holes for TANDEM locking devices at 15 Degrees...

Blum 65.5300 Mounting Plate Boring Template

Blum ZML.3710 LEGRABOX Front Marking Template

The ZML.3710 allows you to precisely mark the boring location for the front fixing brackets for LEGRABOX consistently every time. A simple, easy to use template that brings quality and convenience to the workshop.

Blum 65.7500.03 QUICKFIX Drilling Guage

The Blum QuickFix Drilling Gauge is a simple and convenient device to locate hinge & plate positions. Easily transfers positions from door-to-cabinet and from cabinet-to-door. The positions can then be transferred from either assembled or unassembled...

Blum 65.059A INSERTA Drilling Template for 8mm Dowel holes

INSERTA boring templateBlum 65.059A New 2013 Replaces 65.0590Used for installing Blum hinges with INSERTA or EXPANDOFor Boring 8mm dowel holes AFTER the 35mm hole is bored.Wedge used for the bore distance locator (slides side to side instead of the old...

Blum SR-DREH-TX8 Torx T8 screwdriver for HKi Installation

Blum SR-DREH-TX8 Torx T8 screwdriver for HKi Installation This TX8 Screwdriver is a necessity when installing the Blum HKi Aventos

BLUM BOXFIX E-T FOR TANDEMBOX - ZMM.0350

BLUM BOXFIX E-T FOR TANDEMBOX - ZMM.0350 Features: Assembly device is used for assembling TANDEMBOX drawers and high fronted pull-outsNominal length from 10-5/8" (270 mm) to 25-9/16" (650 mm)Works with cabinet widths from 9-13/16" (250 mm) to 27-1/4"...

Blum 65.3300 Minifix Jig For Blum Drawer Slides

For precise positioning of cabinet profile screws For use with 230E; 230M and METABOX slides

Blum AVENTOS HKi Milling template 65.5840

Blum AVENTOS HKi Milling template 65.5840 Aventos HKi Installation Aventos HKi Technical Information Aventos HKi Image Brochure Aventos Flush Milling Cutter 4mm Instructions Aventos Milling Template Set for AVENTOS HKi Instructions Aventos Raw Boards Set...

Blum ZML.1500 Box System Front Template for METABOX320/330 M K and H

Used for making the front fixing bracket locations on the drawer fronts for drawers that are already installed on the cabinet. For one time jobs or production runs. Eliminates need for calculations and is very accurate.