Hardware

Sugatsune RSS SERIES KNOB Satin Stainless Steel

Sugatsune RSS SERIES KNOB Satin Stainless Steel  

Sugatsune S-100T30 TORQUE LID STAY (FREE STOP)

Sugatsune S-100T30 TORQUE LID STAY (FREE STOP) • Friction torque lid stay holds lid open at any position.• Narrow profile for unobtrusive installation.• Torque Calculation :Torque = Door Height × 1/2 × Door Weight• Left-...

Sugatsune S-20 LID STAY

Sugatsune S-20 LID STAY • Lid stay with ball catch for lightweight doors.• Catch automatically holds lid in openedposition.• Can be installed individually or in pairs.• Handed: Specific left and right hand mounting.

Sugatsune S-21 LID STAY WITH CATCH

Sugatsune S-21 LID STAY WITH CATCH • Lid stay with ball catch for lightweight doors.• Catch automatically holds lid in opened position.• Can be installed individually or in pairs.• Handed: Specific left and right hand mounting.

Sugatsune S-350 SERIES TIE RACKS

Sugatsune S-350 SERIES TIE RACKS Flat Bar Design

Sugatsune S-6166-2 LIFT-OFF HINGE (WELD-ON)

Sugatsune S-6166-2 LIFT-OFF HINGE (WELD-ON) • Weld-on type stainless steel lift-off hinge.• Left and Right handed available.• Door weight: Max. 40 kg/pair (88 lbs/pair)

Sugatsune S-6166-6 LIFT-OFF HINGE (WELD-ON)

Sugatsune S-6166-6 LIFT-OFF HINGE (WELD-ON) • Weld-on type stainless steel lift-off hinge.• Left and Right handed available.• Door weight: Max. 90 kg/pair (198 lbs/pair)

Sugatsune S-6173-2 LIFT-OFF HINGE

Sugatsune S-6173-2 LIFT-OFF HINGE • Screw hole is countersunk from both sides.• Non-handed.• Door weight: Max. 40 kg/pair (88 lbs/pair)

Sugatsune S-6173-5 LIFT-OFF HINGE

Sugatsune S-6173-5 LIFT-OFF HINGE • Screw hole is countersunk from both sides.• Non-handed.• Door weight: Max. 50 kg/pair (110 lbs/pair)

Sugatsune S-AT01, S-AT02 SPRING LOADED LID STAY

Sugatsune S-AT01, S-AT02 SPRING LOADED LID STAY • Side wall mounted.• Spring mechanism assists in lifting door and holds in open position(10°~80°).• Can be installed individually or in pairs.• Non-Handed: Can be installed on...

Sugatsune S-ATJS BALANCE ADJUSTABLE SPRING LOADED LID STAY

Sugatsune S-ATJS BALANCE ADJUSTABLE SPRING LOADED LID STAY • Back panel mounted.• Spring mechanism assists in lifting door and holds in open position (10°~80°).• The balance adjustment allows for use in wider range of lids.•...

Sugatsune S-YT SPRING LOADED LID STAY

Sugatsune S-YT SPRING LOADED LID STAY • Spring mechanism assists in lifting door andholds in open position.• Handed: Specific left and right hand mounting.

Sugatsune S165-76 OVAL ABS CABLE GROMMET

Sugatsune S165-76 OVAL ABS CABLE GROMMET

Sugatsune SAD STAINLESS STEEL VENTILATOR Mesh Type

Sugatsune SAD STAINLESS STEEL VENTILATOR Mesh Type • 0.4 mm mesh wire diameter.• Affix with glue or tack.

Sugatsune SAM S/S WIRE FACE VENTILATOR

SUGATSUNE VENT • 0.4 mm mesh wire diameter.SAM SERIES• Affix with glue.• Low profile design is ideal for tight spaces.

Sugatsune SAZ DIE CAST HANDLE

Sugatsune SAZ-121CR DIE CAST HANDLE

Sugatsune SBH LARGE HANDLE (OFF-SET DESIGN)

Sugatsune SBH LARGE HANDLE (OFF-SET DESIGN) • A minimalist yet functional profile.• Square handle fits perfectly in the hand.• The unique design creates the impression of afloating handle.

Sugatsune SBL-35 Slide Bolt

Sugatsune SBL-35 Slide Bolt • Supplied with mortise and surface strike.

Sugatsune SCC-TF30 COMPACT DRAW LATCH

Sugatsune SCC-TF30 COMPACT DRAW LATCH • Compact size.• Adjustable arm latch.• Screw not included. Recommended screw sizeM3.• Provides consistent hold tension for securelatching. Adjustment shaft can be twisted to adjust length post...

Sugatsune SD-160 RECESSED PULL

Sugatsune SD-160 RECESSED PULL