Product Description
SUGATSUNE Overlay pocket door systems ALT-ST15 D10 SERIES
Pocket Door System (Overlay / Soft-Close) with door alignment adjustability.
Overlay amount is up to 3/8" (10 mm).
Overlay damper unit with adjustment screw included with package.
The damper hinges can be replaced with hinges with catch function (included with package).
The hanging angle of the door can be easily adjusted to counteract/balance and prevent door sag. When installing, the door can be lifted upward into 5 different positions.
The sliding system allows doors to recede inside cabinets. Doors will occupy minimal amount of space, providing full access to cabinet interior.
Slide length: 16"
The fittings allow the door to retract further into the cabinet than the ALTST20-D10.
Durability: successfully passed 40,000 open/close private cycles.
Outset pocket door system with door alignment adjustability.
●The sliding system allows doors to retract inside cabinets. Doors will not occupy space, providing full access to inside of cabinets.
●The hanging angle of the door can be easily adjusted. When installing, the door can be lifted upward into 5 different angles.
●The fittings allow the door to retract further into the cabinet than the ALTST20-D10.
●Overlay amount is up to 10 mm.
●After door installation, adding a damper unit allows the doors to close slowly.
Notes:
●For best performance, precise mortising is required.
●Do not cut slides.
●Do not close doors until they are fully slid out and the catch has activated.
●Doors are set inside the cabinet's frame.
●Install a door stopper (not provided) on the door leading edge of the door.
