Product Description
NOVA PEN MANDREL SAVER 2MT (SKU 9048)
Pen mandrels usually bend into the end indentation of your mandrel when you tighten the tailstock center point. With the NOVA Pen Mandrel Saver 2MT, the mandrel shaft goes through the hollow live center, providing support without pressure. Your pen bushings will press against the center with little to no pressure on the mandrel shaft.
Pen mandrels usually bend into the end indentation of your mandrel when you tighten the tailstock center point. With the NOVA Pen Mandrel Saver 2MT, the mandrel shaft goes through the hollow live center, providing support without pressure. Your pen bushings will press against the center with little to no pressure on the mandrel shaft. Turn the tailstock quill adjustment wheel to tighten the tube and bushing assembly.
• No need for extra spacer bushing – the system adapts to the length of your project
• Adapts to most pen mandrels on the market with a shaft diameter of .245″ or smaller
Packaged Weight: .6 lbs./.272kg
Boxed Dimensions: 5.25’’L x 2.12’’H x 3.5’’W/13.34cm L x 5.39cm H x 8.9cm L
Warranty: 2 Years
IMPORTANT NOTE:
To use this, you will need pen bushings and pen blanks. Additional Purchase from your preferred supply shop.
