Product Description
MYERS MSKHS 2HP SERIES SUBMERSIBLE HIGH HEAD SEWAGE EJECTOR PUMP
The Myers MSKHS Series Submersible Sewage Ejector Pump
is specifically designed to meet the demands of wastewater
and sewage handling in residential and commercial building
applications. The powerful motor is available in 1/2HP, 1-1/2HP,
or 2HP while the pump itself comes standard with a 2” NPT
discharge.
APPLICATIONS:
Residential and commercial sewage.
FEATURES:
The MSKHS50 handles capacities up to 138 gallons per
minute and heads to 45 feet, while the MSKHS100 handles
capacities up to 138 gallons per minute and heads to 58
feet. The MSKHS150 handles capacities up to 138 gallons
per minute and heads to 70 feet, while the MSKHS200
handles capacities up to 138 gallons per minute and heads
to 80 feet.
The MSKHS series feature a heavy duty cast iron
construction that provides durability in rugged
applications, as well as assisting in dissipating heat from
the motor, for cooler operation.
The MSKHS series two-vane, semi-open cast iron
impeller, which is threaded to a stainless steel shaft,
handles applications involving higher capacities and
heads; and is capable of handling up to 2 inch spherical
solids and lint.
The MSKHS series also features a precision carbon and
ceramic-faced mechanical shaft seal that is extensively
lapped, providing for a long, leak proof life.
The MSKHS series pumps have an oil-filled motor that
provides superior cooling characteristics, allowing the
motor to run cool and quiet for years. This oil-filled design
also provides permanent lubrication of the shaft bearings,
minimizing maintenance and extending the service life of
the pump.
To protect against overheating, single-phase motor
windings contain an automatic reset thermal overload;
three phase motors require a magnetic starter with
overload protection located in the accessory
control panel.
SPECIFICATIONS
Power Cord: Water-resistant with molded plug comes in 20 foot lengths
Available Horsepower: 1/2, 1, 1-1/2, 2
Handle: Steel
Lubricating Oil: Dielectric oil
Motor Housing: Cast iron
Pump Volute: Cast iron
Shaft: Stainless steel
Mechanical Shaft Seal: Seal Faces = Carbon/Ceramic;
Spring = Stainless steel; Bellows = Buna-N
Impeller: Cast iron
Upper Bearing: Single row ball bearing
Lower Bearing: Single row ball bearing
Fastener: Stainless steel
