Product Description
Freud LU90M SERIES Thick Aluminum & Non‑Ferrous Blades
Premium TiCo™ HI-Density Carbide Non-Ferrous Blend for Maximum Performance
Freud-Made TiCo™ Carbide specifically designed to cut nonferrous metals extends tooth life
Negative Hook Angles produce a smoother cut in non-ferrous metals with less material distortion and burr free cuts
This blade produces a smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metal extrusions. A high tooth count with a -5° hook angle allows the teeth to slice efficiently through the material without binding. The requirements on the cutting edge greatly differ with nonferrous metals than with cutting wood. With this in mind, Freud formulated a special carbide with high impact strength for this blade. Freud recommends use of a liquid lubricant when cutting non-ferrous materials. This can be accomplished with a spray of WD-40 or other similar type of lubricant every 4 or 5 cuts. Wax sticks are not recommended.
Premium TiCo™ HI-Density Carbide Non-Ferrous Blend for Maximum Performance
Freud-Made TiCo™ Carbide specifically designed to cut nonferrous metals extends tooth life
Negative Hook Angles produce a smoother cut in non-ferrous metals with less material distortion and burr free cuts
Silver Ice Coating resists corrosion and pitch build-up
Ideal For: Cutting Thin Aluminum And Other Non-Ferrous Metals. Wall thickness 1/16" Max.
