Accuride 60" 9301 Heavy Duty Full Extension Slide C9301-E60D Pair

Accuride 60" 9301 Heavy Duty Full Extension Slide C9301-E60D Pair

$342.89
SKU
C9301-E60D
Telescoping, three member, full extension ball bearing slide enhanced for. smoother movement, silenced operation, and improved performance. Load rating: Up to 600 lbs/pair (side mount) and up to 180 lbs/pair (flat mount). With a high reliability and high load capacity, these extra heavy duty slides support 60 Inch wide drawers with slide lengths up to 36 Inch. Well-suited for large pantry pull-outs or other wider, heavier drawers in residences.

SPECIFICATIONS   

  • Full Extension
  • .75 [19.1 mm] side space
  • Non-disconnect
  • Available in even lengths 10"-36", 40", 42", 44" 48", 54", 60" [254-914 mm, 1016 mm, 1067 mm, 1118 mm, 1219 mm, 1372 mm, 1524 mm]
  • Clear zinc finish
  • Supports 42" wide drawers with slide lengths up to 60"
  • Length: 60 inches

LOAD RATINGS   

  • Up to 600 lb/272 kg

LOAD RATING DETAILS   

  • Flat mount: 180 lbs, drawer widths up to 32"
  • Mobile applications: 360 lbs, drawer widths up to 32"
  • Frequent usage: 480 lbs, drawer widths up to 42"
  • Moderate usage: 600 lbs, drawer widths up to 24"
  • Bracket-mounted: 420 lbs, drawer widths up to 42"
  • Bracket-mounted: 600 lbs, drawer widths up to 22"
  • Load ratings based on 10,000 cycle test
  • For additional load ratings consult the technical sheet

SPECIAL FEATURES   

  • Bridged ball spacers minimize side-to-side movement, help increased the load rating up 20%, improve full and over travel reliability and produce smoother and more consistent movement.
  • Adding shock absorbing ball spacer bumpers help reduce the end stop and lower the impact noise.
  • 13% increase in inner and outer member thickness contributes to 20% increased payload
  • Optional platform bracket kit allows for bottom and side mount applications
  • Model 9301E may be installed as a companion slide with Model 9308E (lock-in and lock-out, actuated with a front latch). Special packaging is available for this combination, which includes one standard 9301E and one right-hand 9308E. Supports 60" wide drawers with slides lengths up to 36". The part number for this packaging is 9308-5. This D-pack offering is available in the following lengths: 14"-32", 36", 40", 48", 54" and 60".

OPTIONAL KITS   

  • 9301 Accessory bracket kits offer bottom- and side- mount installation option
Write Your Own Review
You're reviewing:Accuride 60" 9301 Heavy Duty Full Extension Slide C9301-E60D Pair
Your Rating